Building plate carrier caster standard system

The construction of the building plate carrier caster standard system should conform to the actual development of the caster industry and is suitable for guiding the technology research and development, quality control, testing and certification, and supporting services of related enterprises in the caster industry. Guided by the production sequence of products in the caster industry, and fully considering the needs of existing information technology standards and technological development, the standard system constructed should be comprehensive and complete, with appropriate levels and clear divisions.

Here is the content list:

• Construction principles

• Standard Architecture

Construction principles

(1) The principle of goal, the standard system should meet the long-term development goals of building plate carrier caster enterprises in raw materials, production technology, quality control, testing and testing, after-sales service, and brand building, to achieve the orderly, standardized, and standardized development of the industry the goal of.

(2) Systematic principle, the standard system should have specific functions, comprehensively analyze all aspects of the entire life cycle of the building plate carrier caster product, clarify the internal connection and difference between the standards, and operate effectively in the relevant organizations of the caster wheel industry in my country part of an organic whole.

(3) Hierarchical principle: The quasi-system should strictly follow the internal connection of the standard to form a well-defined unity with common and individual characteristics.

(4) The principle of coordination, the standards in the standard system must be coordinated and consistent with each other to form a relationship of interdependence and mutual restriction, to exert the overall efficiency of the system.

Standard Architecture

Taking my country's building plate carrier caster industry as the object, building a standard system structure oriented by the product production sequence and product life cycle, around the design, testing and evaluation, manufacturing, product, after-sales, service, recycling, and other links of caster products, relying on existing national laws and regulations and general basic standards, and supporting raw material and parts standard subsystems, design standard subsystems, product standard subsystems, manufacturing standard subsystems, inspection and testing standard subsystems, packaging labeling standard subsystems and after-sales service and recycling standard subsystem. The standard architecture according to the standard architecture recommended by GB/T 13016-2018, GB/T 15497-2017, and GB/T 15498-2017, for the building plate carrier caster manufacturing industry, the raw materials and parts, design, and development, manufacturing, management control, testing and testing, packaging and identification and other links have been subdivided.

1. Basic Common Criteria Subsystem

This sub-system consists of two parts: Standardization Guidelines and Terms and Definitions. Standardization guidelines mainly cover standardization work guidelines, standard system construction requirements, standardization work guidelines, and other standards. Terms and Definitions Cover the standardization and standards of terms and definitions related to graphic symbols, raw materials, parts, technical requirements, testing, services, etc. involved in all aspects of the building plate carrier caster industry.

2. Standard Subsystem for Raw Materials and Components

The subsystem includes two parts: raw materials and parts. The raw materials mainly include standards such as smart door lock panel resin, rubber, and polyurethane plastics, and the components mainly cover standards such as bearings, fasteners, nuts, screws, screws, and cross recesses.

3. Design standard subsystem

The sub-system includes two parts: the design general standard and the design document standard.

4. Product Standard Subsystem

According to the functional characteristics and scope of application of the product, the sub-system includes two parts: industrial caster standard and furniture caster wheel.

5. Manufacturing standard subsystem

According to the essential elements of heavy-duty workshop caster production, the sub-system includes three parts: equipment and facility standards, process standards, and quality management standards required for caster wheel production.

6. Detection and test of standard subsystem

The sub-system includes two parts: sampling standard and test method standard.

7. Packaging Marking Standard Subsystem

Including packaging and identification of two parts. It mainly covers the standards of product packaging and identification, instructions for use, and guarantee documents.

8. After-sales and recycling standard subsystem

According to the category of product sales and after-sales service, this sub-system includes two parts: after-sales standard and recycling standard.

The above is the relevant content about the standard system of the building plate carrier caster. If you are interested in a heavy-duty caster wheel, or building plate carrier caster, you can contact us. Our website is http://www.senocaster.com/.